• EN
  • DA

Danish NationalResearch Database

  • Publications
  • Researchers
Example Finds records
water{} containing the word "water".
water supplies"{}" containing the phrase "water supplies".
author:"Doe, John"author:"{}" containing the phrase "Doe, John" in the author field.
title:IEEEtitle:{} containing the word "IEEE" in the title field.
bech{} containing the word "bech".
marie bech"{}" containing the phrase "marie bech".
orcid:0000-0002-5429-5292orcid:{} Having a particular ORCID
Need more help? Advanced search tutorial
  • Selected (0)
  • History

Optimized Control Strategy For Over Loaded Offshore Wind Turbines

    • Save to Mendeley
    • Export to BibTeX
    • Export to RIS
    • Email citation
Authors:
  • Odgaard, Peter Fogh ;
    Close
    Orcid logo0000-0003-2132-6918
    Department of Electronic Systems, The Technical Faculty of IT and Design, Aalborg University
  • Knudsen, Torben ;
    Close
    Orcid logo0000-0002-5478-8513
    Department of Electronic Systems, The Technical Faculty of IT and Design, Aalborg University
  • Wisniewski, Rafal ;
    Close
    Orcid logo0000-0001-6719-8427
    Department of Electronic Systems, The Technical Faculty of IT and Design, Aalborg University
  • Bak, Thomas
    Close
    Orcid logo0000-0002-8282-5932
    Department of Electronic Systems, The Technical Faculty of IT and Design, Aalborg University
Abstract:
Abstract Optimized control strategy for overloaded offshore wind turbines Introduction Operation and maintenance cost are an important part of cost of energy especially for offshore wind farms. Typically unplanned service is called for due to detection off excessive loads on components, e.g., the tower. In the process of decreasing the cost of energy of wind turbines it is relevant to continue some level of production while awaiting service and repair of the offshore wind turbine. This is typically done operating the wind turbine in a power de-rated operation mode, assuming that lower power generation results in lower loads on the wind turbine, which enables continued production until next service. Approach Recent results in Model Predictive Control (MPC) applied to wind turbines show a potential for presenting possible controller tunings which weighs multiple conflicting objectives of generated power and the damage equivalent loads for tower fore-aft. Based on these different weights Pareto Fronts depicting the relationship between the generated power and the damage equivalent loads can be computed. Results have shown that the Pareto Front is a very effective tool for selecting the best controller tuning for a given wind turbine. It also enables a very safe and robust comparison between a new control strategy and the present one. Main body of abstract Is it true that power de-rating indeed the best way to reduce loads? The power de-rating approach has the drawback of only indirectly handling the changed objective of the wind turbine operation while awaiting the repair, instead of dealing directly with relevant fatigue loads on the wind turbine. This paper describes and demonstrates this new controller selection tool for the case of operating wind turbine with faults, awaiting repair and service at offshore location, where accessibility can be problematic. The controller objectives are focused directly on the actual objective like lowering of fore aft fatigue loads, instead of using an indirect objective of de-rating the power production of the wind turbine. This means what the wind turbine controller can be selected and tuned directly to obtain a specified reduced fatigue load/ DEL while awaiting service. This will in most cases increase the power generation, compared to the de-rating approach. The latter is a conservative approach, which might end up with too high power reduction as results of ensuring the load reduction to the given level. A MPC controller is configured and tuned using this novel approach including Pareto fronts. It is compared to the existing de-rating strategy using high fidelity aero-servo-elastic simulation code and the possibilities for reduction of cost of energy are outlined. Conclusion In this paper computed Pareto Fronts of a Model Predictive Controller of a wind turbine are used to de-tune a wind turbine operating with faults, such that a controller tuning is selected which lowers the fatigue loads of the wind turbine, such that the model predictive controller is selected for a given fatigue load objective. The Pareto Fronts and evaluations of the proposed scheme is evaluated in a high fidelity aero-eleastic code. Learning objectives This work has two main learning objectives. Compute Pareto Fronts of generated power and tower fore-aft fatigue loads of a wind turbine for a number a model predictive controller turnings with different weightings between power generation and load reduction. Selection of model predictive controller turnings depending on the operational conditions of the wind turbine. e.g. for offshore wind turbines with faults.
Type:
Conference paper
Language:
English
Published in:
Proceedings of Ewea Offshore 2015, 2015
Main Research Area:
Science/technology
Publication Status:
Published
Series:
European Wind Energy Association (ewea Offshore). Proceedings
Review type:
Peer Review
Conference:
EWEA Offshore 2015
Publisher:
EWEA
Submission year:
2015
Scientific Level:
Scientific
ID:
2398087053
Checking for on-site access...

On-site access

At institution

  • Aalborg university.en
Feedback

Sitemap

  • Search
    • Statistics
    • Tutorial
    • Data
    • FAQ
    • Contact
  • About
    • Institutions
    • Release History
    • Cookies and Personal Data
  • Open Access
    • The Danish Open Access Indicator

Copyright © 1998–2018.

Fivu en