von Solms, Nicolas3; Michelsen, Michael Locht3; Kontogeorgis, Georgios3
1 Center for Phase Equilibria and Separation Processes, Department of Chemical and Biochemical Engineering, Technical University of Denmark2 Department of Chemical and Biochemical Engineering, Technical University of Denmark3 Center for Energy Resources Engineering, Center, Technical University of Denmark
Using simplified PC-SAFT we have modeled gas solubilities at high temperatures and pressures for the gases methane and carbon dioxide in each of the three polymers high-density polyethylene (HDPE), nylon polyamide-11 (PA-11), and poly(vinylidene fluoride) (PVDF). In general the results are satisfactory, using in most cases a single, temperature-independent value of the binary interaction parameter. In the cases of methane in HDPE and PVDF, a temperature-dependent binary interaction parameter was required. New pure component polymer parameters for PA-11 and PVDF were obtained using a recently developed prediction scheme which does not rely on binary experimental data.
Industrial and Engineering Chemistry Research, 2005, Vol 44, Issue 9, p. 3330-3335