1 Department of Wind Energy, Technical University of Denmark2 Test and Measurements, Department of Wind Energy, Technical University of Denmark3 Meteorology & Remote Sensing, Department of Wind Energy, Technical University of Denmark
The present report describes a method to calibrate a spinner anemometer ow angle measurements. The turbine is yawed several times (5 times approximately 60 with respect to the wind direction) in steady wind (> 6 m/s) and measurements of yaw position (measured by a yaw position sensor) and yaw misalignment (measured by the spinner anemometer under calibration) are recorded. The tangent of the two angles is plotted in a scatter plot. A linear fitting is made, and the slope coefficient is the correction factor Fα. The method applied to a Nordtank 500kW wind turbine erected at the Risø test site is presented in this report.