1 Center for Nuclear Technologies, Technical University of Denmark2 Radiation Physics, Center for Nuclear Technologies, Technical University of Denmark3 Uppsala University4 General AtomicNes5 NeoCoat SA6 European Spallation Source ESS AB
A substantial part of the price for a neutron guide is the shielding needed because of the gamma ray produced when neutrons are absorbed. This absorption occurs in the coating and the substrate of the neutron guides. Traditional m=1 coatings have been made of Ni and if reflectivity over the critical angle of Ni is needed one has used Ni58 or Ni/Ti multilayer coatings. Ni has one of the highest neutron scattering density but it also has a fairly high absorption cross section for cold and thermal neutrons and when a neutron is absorbed it emits a lot of gamma rays, some with energies above 9 MeV. Materials like diamond and Be have higher neutron scattering density than Ni, have smaller absorption cross section and when a neutron is absorbed they emit much less gamma ray and at lower energies. We present results, both theoretically and experimentally, comparing Ni with Be and preliminary results of diamond coatings to show the potential for using these coatings in neutron guides.
Journal of Physics: Conference Series (online), 2014, Vol 528
Main Research Area:
International Workshop on Neutron Optics and Detectors, 2014