1 Department of Chemistry, Technical University of Denmark2 Centre for Catalysis and Sustainable Chemistry, Department of Chemistry, Technical University of Denmark3 Department of Chemical and Biochemical Engineering, Technical University of Denmark4 CHEC Research Centre, Department of Chemical and Biochemical Engineering, Technical University of Denmark5 Center for Hyperpolarization in Magnetic Resonance, Center, Technical University of Denmark
Fe/TiO2 based catalysts were prepared by incipient wetness impregnation and deposition–precipitation (DP). The catalysts were characterized by activity measurements, N2 physisorption, X-ray powder diffraction, electron paramagnetic resonance spectroscopy, energy dispersive X-ray spectroscopy, H2-temperature programmed reduction and NH3-temperature programmed desorption. The 3 wt% Fe–10 wt% WO3/TiO2 (3Fe–10WTi-DP) catalyst prepared by DP using ammonium carbamate as a precipitating agent was found to be the most active and hydrothermally stable with 11 vol% H2O in air at 650 °C for 3 h. The hydrothermal stability of the catalyst can be attributed to the retained crystal structure, and mild change in acidic and redox properties of the catalyst. Furthermore, hydrothermal stability of the 3Fe–10WTi-DP catalyst is competitive with that of 3Fe–ZSM-5 and much better than 3V2O5–10WO3–TiO2 catalysts.Relative SCR activity of catalysts at 450 °C.
Catalysis Letters, 2014, Vol 144, Issue 7, p. 1170-1177
HASH(0x443d6a8); SCR of NO with NH3; Fe; Hydrothermal; Deposition–precipitation