Laan, van der, Paul Maarten1; Storey, R. C.3; Sørensen, Niels N.1; Norris, S.E.3; Cater, J. E.3
1 Department of Wind Energy, Technical University of Denmark2 Aeroelastic Design, Department of Wind Energy, Technical University of Denmark3 University of Auckland
A comparison is made between the EllipSys3D and SnS CFD codes. Both codes are used to perform Large-Eddy Simulations (LES) of single wind turbine wakes, using the actuator disk method. The comparison shows that both LES models predict similar velocity deficits and stream-wise Reynolds-stresses for four test cases. A grid resolution study, performed in EllipSys3D and SnS, shows that a minimal uniform cell spacing of 1/30 of the rotor diameter is necessary to resolve the wind turbine wake. In addition, the LES-predicted velocity deficits are also compared with Reynolds-Averaged Navier Stokes simulations using EllipSys3D for a test case that is based on field measurements. In these simulations, two eddy viscosity turbulence models are employed: the k- (ε) model and the k- (ε)-fp model. Where the k- (ε) model fails to predict the velocity deficit, the results of the k- (ε)-fP model show good agreement with both LES models and measurements.
Journal of Physics: Conference Series (online), 2014, Vol 524, Issue 1
Main Research Area:
5th International Conference on The Science of Making Torque from Wind 2014European Academy of Wind Energy : The Science of Making Torque from Wind