Hey, G.6; Vega, S. R.4; Fick, J.5; Ledin, A.6; la Cour Jansen, J.6; Andersen, Henrik Rasmus1
1 Department of Environmental Engineering, Technical University of Denmark2 Urban Water Engineering, Department of Environmental Engineering, Technical University of Denmark3 Lund University4 Complutense University5 Umeå University6 Lund University
Ozonation to achieve removal of pharmaceuticals from wastewater effluents, with pH values in the upper and lower regions of the typical range for Swedish wastewater, was investigated. The main aim was to study the effects of varying pH values (6.0 and 8.0), and if small additions of H2O2 prior to ozone treatment could improve the removal and lower the reaction time. The effluents studied differed in their chemical characteristics, particularly in terms of alkalinity (65.3–427 mg·l-1) HCO3-), COD (18.2–41.8 mg·l-1), DOC (6.9–12.5 mg·l-1), ammonium content (0.02–3.6 mg·l-1) and specific UV absorbance (1.78–2.76 l·mg-1)·m-1). As expected, lower ozone decomposition rates were observed in the effluents at pH 6.0 compared to pH 8.0. When pH 8.0 effluents were ozonated, a higher degree of pharmaceutical removal occurred in the effluent with low specific UV absorbance. For pH 6.0 effluents, the removal of pharmaceuticals was most efficient in the effluent with the lowest organic content. The addition of H2O2 had no significant effect on the quantitative removal of pharmaceuticals but enhanced the ozone decomposition rate. Thus, H2O2 addition increased the reaction rate. In practice, this will mean that the reactor volume needed for the ozonation of wastewater effluents can be reduced.
Water S a (online Edition), 2014, Vol 40, Issue 1, p. 165-173