1 Department of Energy Technology, The Faculty of Engineering and Science, Aalborg University, VBN2 The Faculty of Engineering and Science (ENG), Aalborg University, VBN3 Electric Power Systems, The Faculty of Engineering and Science, Aalborg University, VBN
Residue method is a commonly used approach to design the parameters of a power system stabilizer (PSS). In this paper, a residue identification method is adopted to obtain the system residues for different input-output pairs, using the system identification toolbox in MATLAB with the measurement data from time domain simulations. Then a coordinated approach for multiple PSS selection and parameter design based on residue method is proposed and realized in MATLAB m-files. Particle swarm optimization (PSO) is adopted in the coordination process. The IEEE 39-bus New England system model as the test system is built in DIgSIELNT PowerFactory 14.0, in which the proposed coordination method is validated by time domain simulations and modal analysis.
Proceedings of the Annual Conference of the Ieee Industrial Electronics Society, 2013, p. 2157-2162
Coordinated selection and design; PSO; PPS; Residue method
Main Research Area:
I E E E Industrial Electronics Society. Annual Conference. Proceedings
39th Annual Conference of the IEEE Industrial Electronics Society, 2013