1 Department of Wind Energy, Technical University of Denmark2 Wind Energy Systems, Department of Wind Energy, Technical University of Denmark3 Tsinghua University4 Risø National Laboratory for Sustainable Energy, Technical University of Denmark5 Tsinghua University
This paper presents a novel type of variable speed wind turbine with a new drive train different from the variable speed wind turbine commonly used nowadays. In this concept, a synchronous generator is directly coupled with the grid, therefore, the wind turbine transient overload capability and grid voltage support capability can be significantly improved. An electromagnetic coupling speed regulating device (EMCD) is used to connect the gearbox high speed shaft and synchronous generator rotor shaft, transmitting torque to the synchronous generator, while decoupling the gearbox side and the synchronous generator, so the synchronous generator torque oscillations during a grid fault are not transmitted to the gearbox. The EMCD is composed of an electromagnetic coupler and a one quadrant operation converter with reduced capability and low cost. A control strategy for the new wind turbine is proposed and a 2 MW wind turbine model is built to study the wind turbine fault ride-through capability. An integrated simulation environment based on the aeroelastic code HAWC2 and software Matlab/Simulink is used to study its fault ride-through capability and the impact on the structural loads during grid three phase and two phase short circuit faults.
Energies, 2013, Vol 6, p. 6120-6136
Variable speed wind turbine; Electromagnetic coupler; Synchronous generator; Voltage support capability; HAWC2; Structural loads