Odgaard, Peter Fogh4; Stoustrup, Jakob2; Wickerhauser, Mladen Victor6
1 Aalborg University, VBN2 Automation & Control, The Technical Faculty of IT and Design, Aalborg University, VBN3 Department of Electronic Systems, The Technical Faculty of IT and Design, Aalborg University, VBN4 The Faculty of Engineering and Science (TECH), Aalborg University, VBN5 Washington University St. Louis6 Washington University St. Louis
In this paper the detection of faults on the surface of a compact disc is addressed. Surface faults like scratches and fingerprints disturb the on-line measurement of the pick-up position relative to the track. This is critical since the pick-up is focused on and tracked at the information track based on these measurements. A precise detection of the surface fault is a prerequisite to a correct handling of the faults in order to protect the pick-up of the compact disc player from audible track losses. The actual fault handling which is addressed in other publications can be carried out by the use of dedicated filters adapted to remove the faults from the measurements. In this paper detection using wavelet packet filters is demonstrated. The filters are designed using the joint best basis method. Detection using these filters shows a distinct improvement compared to detection using ordinary threshold methods.
Proceedings of 6th Ifac Symposium on Fault Detection, Supervision and Safety of Technical Processes, 2006, p. 1165-1170
Fault detection; CD rom; Fault tolerant systems; Signal analysis; Time-frequiency localization
Main Research Area:
6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, 2006