The purpose of this study was to investigate the in vitro release of 5-aminosalicylic acid from single extrudates by UV imaging and to explore the technique as a visualization tool for detecting film coating defects on extrudates coated with a thin ethyl cellulose layer. 5-Aminosalicylic acid extrudates were film coated with ethyl cellulose in a typical lab system coater equipped with one Wurster partition. Dissolution testing was performed first in a conventional paddle dissolution apparatus and second, in a flow through geometry equipped with a UV imaging system. Selected film coated extrudates from four different coating levels were placed in agarose gels and UV imaging was performed for a total of 240min. Absorbance maps were obtained thus visualizing the release of 5-aminosalicylic acid over time and it was possible to detect a decrease in release as a function of increased ethyl cellulose coating weight gain. Using a calibration curve the released amount was calculated and the individual release profiles for each coating weight gain in general resulted in comparable release profiles. Furthermore, the release profiles were consistent with the dissolution results obtained from the paddle dissolution testing. The release from defect extrudates was visualized by the absorbance maps and the release was highest from the compromised part of the extrudates. UV imaging has proven to be a useful technique to visualize the release of 5-aminosalicylic acid from single film coated extrudates and it has potential for detection of film coating defects.
Journal of Pharmaceutical and Biomedical Analysis, 2013, Vol 83, p. 49-56