Bañas, Andrew Rafael1; Palima, Darwin1; Aabo, Thomas1; Glückstad, Jesper1
1 Department of Photonics Engineering, Technical University of Denmark2 Teraherts Technologies and Biophotonics, Department of Photonics Engineering, Technical University of Denmark
Direct laser writing and other recent fabrication techniques offer a wide variety in the design of microdevices. Hence, modeling such devices requires analysis methods capable of handling arbitrary geometries. Recently, we have demonstrated the potential of microtools, optically actuated microstructures with functionalities geared towards biophotonics applications. Compared to dynamic beam shaping alone, microtools allow more complex interactions between the shaped light and the biological samples at the receiving end. For example, strongly focused light coming from a tapered tip of a microtool may trigger highly localized non linear processes in the surface of a cell. Since these functionalities are strongly dependent on design, it is important to use models that can handle complexities and take in little simplifying assumptions about the system. Hence, we use the finite difference time domain (FDTD) method which is a direct discretization of the fundamental Maxwell's equations applicable to many optical systems. Using the FDTD, we investigate light guiding through microstructures as well as the field enhancement as light comes out of our tapered wave guide designs. Such calculations save time as it helps optimize the structures prior to fabrication and experiments. In addition to field distributions, optical forces can also be obtained using the Maxwell stress tensor formulation. By calculating the forces on bent waveguides subjected to tailored static light distributions, we demonstrate novel methods of optical micromanipulation which primarily result from the particle's geometry as opposed to the directly moving the light distributions as in conventional trapping.
Masomo - Modeling, Analysis, and Simulation of Optical Modes in Photonic Devices: Abstracts, 2013
Microfabrication; Optical trapping; Finite difference time domain; Maxwell stress tensor
Main Research Area:
MASOMO 2013 - Modeling, Analysis, and Simulation of Optical Modes in Photonic Devices
WIAS - Weierstrass Institute for Applied Analysis and Stochastics