1 Department of Energy Technology, The Faculty of Engineering and Science, Aalborg University, VBN2 The Faculty of Engineering and Science (ENG), Aalborg University, VBN3 Power Electronic Systems, The Faculty of Engineering and Science, Aalborg University, VBN4 Electric Power Systems, The Faculty of Engineering and Science, Aalborg University, VBN5 unknown
Application to wind power
As more renewable energy sources, especially more wind turbines are installed in the power system, analysis of the power system with the renewable energy sources becomes more important. Short-circuit calculation is a well known fault analysis method which is widely used for early stage analysis and design purposes and tuning of the network protection equipments. However, due to current controlled power converter-based grid connection of the wind turbines, short-circuit calculation cannot be performed with its current form for networks with power converter-based wind turbines. In this paper, an iterative approach for short-circuit calculation of networks with power converter-based wind turbines is developed for both symmetrical and asymmetrical short-circuit grid faults. As a contribution to existing solutions, negative sequence current injection from the wind turbines is also taken into account in calculations in case of asymmetrical faults. The developed iterative short-circuit calculation method is verified with time domain simulations.
Ieee Power and Energy Society General Meeting, 2012, p. 1-8
Main Research Area:
Ieee Power and Energy Society General Meeting
2012 IEEE Power and Energy Society General Meeting, 2012