1 Manufacturing Engineering, Department of Mechanical Engineering, Technical University of Denmark2 Department of Mechanical Engineering, Technical University of Denmark3 Autodesk Inc4 University of Bradford
The use of simulation for injection moulding design is a powerful tool which can be used up-front to avoid costly tooling modifications and reduce the number of mould trials. However, the accuracy of the simulation results depends on many component technologies and information, some of which can be easily controlled or known by the simulation analyst and others which are not easily known. For this reason, experimental validation studies are an important tool for establishing best practice methodologies for use during analysis set up on all future design projects. During the validation studies, detailed information about the moulding process is gathered and used to establish these methodologies. Whereas in routine design projects, these methodologies are then relied on to provide efficient but reliable working practices. Data analysis and simulations on preliminary micro-moulding experiments have been conducted. Numerous difficulties are identified which must be overcome for the accurate simulation of the micro-moulding process.
Main Research Area:
Report for Fp7 Eu Project Cotech “converging Technologies for Micro Systems Manufacturing"